In this excerpt from the Exposing Motion Picture Film Masterclass, we extend a 15-minute window of twilight into a 40-minute shoot.

(Watch the first 6 minutes of Exposing Motion Picture Film Masterclass for free.)

VIDEO LESSON EXCERPT: HOW TO EXTEND MAGIC HOUR

THE CHALLENGE: THE BLUE SHIFT

When the sun sets, the color temperature of the world shifts dramatically. The warm sun disappears, and you are left with the ambient light of the sky, which skyrockets to a very cold 8800 Kelvin or higher.

If you are shooting on standard daylight film, your footage will look aggressively, unnaturally blue. If you are shooting on tungsten film (which expects orange light), it will look even bluer.

1. THE FILM STOCK STRATEGY (500T)

To combat the dropping light levels, we need speed. I always choose the highest speed stock available: Kodak Vision3 500T (5219).

Why 500T? 

“T” stands for Tungsten (3200K). This stock is designed for indoor artificial light. This seems counterintuitive for an outdoor shoot, but 500T is the most sensitive stock Kodak makes. We need that sensitivity to see into the dark.

2. THE FILTER STACK (THE “WARM-UP”)

Because we are shooting Tungsten film outdoors, we need to correct the color temperature.

The Exposure Formula

With these filters in place, we are losing light. To compensate, I rate my light meter to 160 ISO (overexposing the 500T stock by roughly 2/3 of a stop) at 24 fps. This ensures a thick negative that captures rich color even as the light fades.

3. EXTENDING TIME WITH GEOGRAPHY

Most filmmakers wait for the sun to hit the horizon to start their “magic hour” clock. That gives you 15 minutes, tops.

By using a building to block the sun, we create “artificial dusk” 20 minutes before actual sunset. This simple location choice doubles our shooting window, giving us 40 minutes of usable soft light instead of 20.

4. THE SILVER BULLET (REFLECTORS)

As the light levels drop, a white bounce board becomes useless. It simply doesn’t have the punch to reflect the weak ambient light.

Switch to Silver.

We bring in a Silver Reflector (or shiny board) to catch the remaining blue sky ambiance and redirect it into the talent’s eyes.

5. THE “WEST-FIRST” SHOOTING ORDER

This is the most critical logistical rule of twilight photography. You must shoot your coverage in a specific order to survive the fading light.

Shoot WEST First (Camera facing East).

Why? Because the “source” of your light is the setting sun in the West (behind the camera). The Western sky is the brightest thing in the universe right now.

If you shoot the silhouette first, by the time you turn around to shoot the face, the “softbox” in the Western sky will be gone, and your actor will be in the dark.

THE BOTTOM LINE:

Shooting motion picture film at twilight is all about logistics. By choosing the fast 500T stock, stacking warming filters, blocking the sun early, and shooting West-first, you can squeeze every photon out of the day.

UNLOCK THE FULL MASTERCLASS

Understanding filters is just one piece of the puzzle. To truly shoot motion picture film, you need to master the light meter, understand stock personalities, and know how to manipulate the chemical process itself.

In the Exposing Motion Picture Film Masterclass, Shane Hurlbut, ASC takes you through every step of this journey.

JOIN FILMMAKERS ACADEMY AND SAVE $50!

Ready to take your filmmaking skills to the next level? Join the Filmmakers Academy community and gain access to exclusive content, expert mentorship, and a network of passionate filmmakers. Use code FABLOG50 to save $50 on your annual membership! 

The post How to Extend “Magic Hour” on Motion Picture Film appeared first on Filmmakers Academy.

George Eastman | Bettmann Archive

Without this flexible medium that could be wound through a camera, advanced frame by frame, and projected in rapid succession, the moving image would have remained an impossible dream. This single breakthrough opened the door to an entirely new art form. And it was one that would reshape human storytelling forever.

Before diving into the technical craft, it’s essential to understand why this education is so vital and why Filmmakers Academy is dedicated to bringing it to a modern audience.

WATCH THE INTRO LESSON:

THE ENDURING LEGACY OF CELLULOID:

For over a century, motion picture film has been the backbone of cinema. It has shaped how movies are made and how we see and understand the world itself. The masters who defined the art form — filmmakers like Stanley Kubrick, Vilmos Zsigmond, Agnès Varda, and Martin Scorsese — all crafted their visions through the unique artistry of celluloid.

Agnès Varda | Courtesy Academy Museum of Motion Pictures

Today, that tradition burns brighter than ever. Contemporary auteurs like Paul Thomas Anderson, Lynne Ramsay, Christopher Nolan, and Quentin Tarantino don’t just prefer film; they’ve made it their cornerstone, often refusing to work with anything else. 

Lynne Ramsay | Photo Credit: Kimberley French

A new generation of filmmakers is discovering this medium daily, yet quality, practical education about it remains frustratingly out of reach for most.

HOW FILM TRANSFORMS THE CREATIVE PROCESS:

For Brendan Sweeney, CEO of Filmmakers Academy, working with motion picture film was a transformative experience. It’s a completely different creative process from digital. It forces a filmmaker to be more intentional and more collaborative on set. It also connects the creator to something tangible.

Brendan Sweeney | Photo Credit: Steven Napolitano

All in all, celluloid creates analog, adrenaline-fueled moments when the camera rolls. The filmmaker knows that everything must be perfect because there’s no “delete” button. This process demands a level of discipline, preparation, and trust in your team that digital capture, for all its conveniences, simply does not.

THIS IS THE DNA OF FILMMAKING:

In this course, Brendan Sweeney guides filmmakers through cinema’s most enduring tradition, showing them how to understand film and make it accessible for their own work.

Here’s the most important takeaway: whether a filmmaker is shooting film today, next year, or remains devoted to digital, understanding this medium will make them a better filmmaker.

When a filmmaker understands how film sees light, how it renders color, and how an emulsion captures a “real” image, they gain a foundational knowledge of light, exposure, and texture. 

This knowledge translates directly to their digital work. It allows them to make better, more intentional choices on any camera, in any format, for the rest of their career.

Understanding Film’s DNA: The Chemical Magic of Celluloid

In an age of digital pixels and AI-driven imagery, motion picture film remains a marvel of chemical engineering. This lesson peels back the layers of celluloid to reveal why it still serves as the gold standard for cinematic storytelling.

You will learn that film is a “chemical canvas” comprised of a stable plastic base and a light-sensitive emulsion. Suspended within this emulsion are millions of silver halide crystals — the true architects of the film look.

Click the button below to get the first lesson for FREE!

Whether you are an analog purist or a digital shooter looking to understand the roots of your craft, this lesson provides the essential theory behind the “film look” that digital cameras have spent decades trying to emulate.

Exposing Motion Picture Film Masterclass

The post Motion Picture Film For Beginners appeared first on Filmmakers Academy.

Film is making a comeback. From the IMAX spectacle of Oppenheimer to the gritty texture of indie darlings, directors are returning to the medium. But shooting on film is a discipline. It demands that you stop relying on a monitor and start trusting your eye, your tools, and your knowledge.

That is why I partnered with KODAK to create the Exposing Motion Picture Film Masterclass. Drawing from my experience lensing over 23 feature films on 35mm, 16mm, and Super 8 since 1986, this course demystifies the process of exposing film.

Below is an in-depth look at the foundational principles covered in the first chapter of the masterclass. We are going to strip away the digital safety net and look at the science of film stocks, the difference between negative and reversal, and the glass filters required to paint with light.

PART 1: UNDERSTANDING YOUR CANVAS (FILM STOCKS)

Before you can expose a single frame, you must understand the physical medium you are loading into the camera. Unlike a digital sensor, which has a fixed native sensitivity, film allows you to change your “sensor” every time you change a roll.

1. DECODING THE NUMBERS: 35MM VS. 16MM

Kodak organizes their film stocks using a specific numbering system. Understanding this code is the first step in professional film logistics.

2. COLOR NEGATIVE FILM: THE INDUSTRY STANDARD

The vast majority of modern motion pictures are shot on Color Negative film. This film produces an image with inverted colors and tones. When printed or scanned, these colors are reversed to create the final positive image. Color negative is processed using the ECN-2 chemical process.

3. COLOR REVERSAL FILM (VNF): THE “NEWS” AESTHETIC

Before video cameras took over, news broadcasters used Reversal Film, often called Video News Film (VNF). Unlike negative film, reversal film produces a positive image directly on the strip — like a slide projector image.

The Aesthetic Trade-off: Reversal film has significantly less dynamic range (latitude) than negative film. If you miss your exposure, the film is unforgiving. However, this limitation creates a unique, “cranked” aesthetic.

PART 2: ANALOG WHITE BALANCE (THE ART OF GLASS)

On a digital camera, if you walk from a tungsten-lit room (3200K) out into the sun (5600K), you simply dial a knob to change your white balance. In analog filmmaking, your white balance is chemically baked into the film stock. To change it, you must be a craftsman.

THE PROBLEM: SHOOTING TUNGSTEN FILM IN DAYLIGHT

If you load a roll of 500T (Tungsten) because you love the grain structure or need the speed, but you shoot outside in daylight without modification, your image will be overwhelmingly blue. The film expects orange light, but you are feeding it blue daylight.

THE SOLUTION: THE 85 FILTER

To correct this “in-camera,” you must place an 85 Filter in front of the lens.

This is the essence of analog filmmaking: solving problems with physics and glass, not software. 

STOP CHASING THE “LOOK.” MASTER THE SOURCE. 

What we’ve covered here—identifying stocks, understanding ECN-2 vs. Reversal, and filtration — is just the first six minutes of a deep, comprehensive education.

Shooting on film requires you to be both a scientist and an artist. You cannot rely on a waveform monitor or a false-color overlay to save you. You must understand lighting ratios, you must know how to use an incident meter and a spot meter, and you must understand how to manipulate the chemical process (Push and Pull processing) to achieve your vision.

READY TO MASTER THE CRAFT THAT ENDURES?

In the full Exposing Motion Picture Film Masterclass, I take you on location to master high-contrast backlit scenes, harsh side lighting, and the precise techniques for extending “magic hour.” We dive deep into filter factors, the philosophy of the “thick negative,” and how to control contrast using graduated NDs and attenuators.

Forget “fast.” Choose timeless. Master the process.

This masterclass was produced in collaboration with Kodak. 

The post Exposing Film Stocks: 16mm Film & 35mm Film appeared first on Filmmakers Academy.

Why? In 2025, when digital cameras are more accessible and capable than ever, why go back to a technology that is over a century old? 

The answer isn’t just nostalgia. It’s about a fundamental difference in process, philosophy, and ultimately, the emotional resonance of the image. Shooting on film changes how you see, how you work, and how your audience feels.

Behind the scenes of Kiss Me Goodbye | Courtesy of Brendan Sweeney

In this spotlight, we explore the enduring relevance of celluloid through the lens of filmmaker Brendan Sweeney. His journey — from the digital revolution to a deep commitment to 16mm — illustrates why film remains the gold standard for storytelling.

THE DIGITAL REVOLUTION AND THE FEAR OF LOSS:

To understand the resurgence of film, we have to look back at the moment it almost disappeared. Brendan Sweeney’s journey began right as the industry was undergoing a seismic shift.

“I knew I wanted to be a filmmaker after I saw The Fellowship of the Ring,” Brendan recalls. “I loved the way movies made me feel… the manipulative feeling of filmmaking.” 

But as he entered film school, the landscape was changing. The “Digital Revolution,” spearheaded by cameras like the Canon 5D and the RED One, was in full swing.

The Lord of the Rings: The Fellowship of the Ring | New Line Cinema

For a young filmmaker, this created a sense of urgency.

“I remember thinking… if I want to be a director like all of my heroes — Kubrick, Cimino — something inside me told me that I need to be able to learn how to shoot on film before it’s gone.”

“Harriett” the Arriflex SR2 Film Camera | Courtesy of Brendan Sweeney

Brendan had realized that the masters of cinema had all been forged in the discipline of celluloid. To truly understand the craft, one had to understand its original medium. So, while universities were liquidating their film equipment, Brendan went against the grain. He bought an Arriflex SR2 camera for $1,100 — a steal for a piece of cinema history — and committed to learning the “dead” language of film.

THE BRENDAN SWEENEY PHILOSOPHY OF FILM:

The most profound difference between film and digital isn’t resolution or dynamic range; it’s the process.

On a digital set, the monitor is king. We shoot, we check playback, we tweak, we shoot again. We can “fix it in post.” 

Film strips away that safety net.

“With a film test, or just shooting film in general, it’s your mind,” Brendan explains. “It’s using your mind to craft something.” 

Brendan filming in the desert | Courtesy of Brendan Sweeney

Without a high-definition monitor to rely on, the filmmaker must trust their knowledge of exposure, lighting ratios, and lenses. You have to visualize the image in your head before you capture it. This forces a level of intentionality that digital rarely demands. 

“The film matters, the f-stop matters… you have to think through every detail.” 

This heightened state of focus trickles down to the entire crew. When the camera rolls, everyone knows that money is physically running through the gate. The stakes are higher, the focus is sharper, and the resulting energy on set is palpable. It creates “analog, adrenaline-fueled moments” where the entire team is synchronized in pursuit of a perfect take.

WHY FILM FEELS DIFFERENT:

Technically, digital sensors have come a long way in emulating film. But there is an aesthetic quality to celluloid — a “soul” — that is incredibly difficult to replicate with 1s and 0s.

In his short film Kiss Me Goodbye, Brendan chose to shoot on Orwo N74 Plus, a black and white stock, to evoke a timeless, Twilight Zone-esque atmosphere. 

Behind the scenes of Kiss Me Goodbye | Courtesy of Brendan Sweeney

“There’s really something about shooting a movie in black and white versus color,” he notes. 

The grain structure, the way it highlights bloom rather than clip, and the organic texture of the image create a separation from reality that feels more dreamlike and cinematic.

Even in color, film has a distinct signature. The video below is Brendan’s first-ever film test, using Kodak VISION3 500T 7219 & 250D 7207. While yes, the light is certainly hot, you can see the glowy, velvety nature of 16mm film. 

In a test shot in the California desert using Kodak Vision3 250D and ORWO N74 Plus, the results were immediate.

“It just looks like 16mm beauty,” Brendan says. “The shadows are definitely cool, but the environment’s warm, which is a cool duality.”

Digital images can often feel clinical or hyper-real, adding a whole other technical obstacle to counteract. Film, with its chemical imperfections and organic grain, often feels more human. It softens the edges of reality, allowing the audience to project themselves into the story more easily. 

It is, as Brendan puts it, “a medium that takes precision, but it’s also a medium that’s extremely forgiving.”

THE “STORE 242” EXPERIMENT: MIXING MEDIA

The true test of a film’s relevance is how it stands up against modern digital workflows. For a fashion commercial for the boutique Store 242, Brendan and cinematographer Shane Hurlbut, ASC devised a concept that used both formats to tell a story.

The concept was a dress “birthing out into the world.” For the gritty, industrial interiors, they shot on 16mm Kodak 250D with Zeiss Super Speed lenses. The grain and texture of the film captured the raw, confined energy of the space. 

“The sheer level of detail here… was really awesome,” Brendan notes.

As the character escapes into the open desert, the production switched to a RED Weapon Dragon 6K digital camera. The contrast was intentional: the “pristine, crystal clear” digital image represented the open, modern world, while the film represented the textured, organic origin.

Brendan behind the scenes with Shane Hurlbut, ASC | Courtesy of Brenday Sweeney

This project highlighted how film could be used for more than just a “look”. It’s a storytelling tool. It also proved that even veteran DPs like Shane Hurlbut, who had championed the digital revolution, still found immense value and joy in returning to the discipline of film.

THE FUTURE IS ANALOG (AND DIGITAL):

So, is film better than digital? It’s the wrong question. They are different brushes for different paintings.

“There’s places where digital is better than film, and vice versa,” Brendan acknowledges. “There’s things that digital can do that film could never do.” 

DP Stefano Ceccarelli behind the scenes of Kiss Me Goodbye | Courtesy of Brendan Sweeney

High frame rates, low-light sensitivity, and immediate workflows are undeniable advantages of digital cinema.

However, for narrative storytelling — for capturing the human condition — film remains the “preferred” medium for many. 

“If it’s a grounded and modern-day piece, I still think film brings a certain level of quality and craftsmanship to it that maybe is not found in some other places,” Brendan says.

HOW TO START SHOOTING FILM TODAY:

If you are an indie filmmaker inspired to shoot film, the barrier to entry is lower than you think. You don’t need to buy an Arriflex SR2.

Stefano Ceccarelli shooting stills photography | Courtesy of Brendan Sweeney

THE BOTTOM LINE:

Shooting on film in the digital era is a choice to prioritize craft over convenience. It’s a commitment to a process that demands more from you but gives back something intangible and beautiful in return. 

Whether you are shooting a student short or a feature film, choosing celluloid is a powerful declaration that the way you make a film matters just as much as the story you tell.

As Brendan concludes, “Now that I move into other projects, film is just something that I want to continue to shoot, because when you look at the results… it’s just incredible.”

STOP IMITATING THE LOOK, MASTER THE SOURCE. 

In an age of digital “fixes,” the true craft of exposing celluloid has become a rare skill. To bridge this gap, Filmmakers Academy has partnered with KODAK to launch the definitive Exposing Motion Picture Film Masterclass.

Taught by Shane Hurlbut, ASC, this course offers a comprehensive, “brick-and-mortar” education that demystifies the entire analog process. Drawing from his experience shooting over 23 feature films on 35mm and 16mm, Shane teaches you to stop relying on a monitor and start trusting your eye, transforming you from a digital operator into a true artisan of light and chemistry.

This masterclass covers everything from the unique personalities of Kodak’s Vision3 stocks to the precise science of using light meters and glass filters. You’ll learn to control contrast in-camera, master filter factors, and handle complex lighting scenarios without a digital safety net.

The post Why We Still Shoot Film in the Digital Age appeared first on Filmmakers Academy.